395 specifications
Typical applications
- Analog watches
- calculators
- low-drain instruments
Replacement decision
Resolve the original marking to this profile, then confirm nominal voltage, chemistry, dimensions, polarity and any drain or terminal suffix. Capacity alone does not establish interchangeability.
Exact equivalents and aliases
395 is the canonical 1.55 V silver-oxide profile with the 9.5 × 2.7 mm SR927SW dimensions. 399 shares those dimensions with a different W drain marking; LR927 is a 1.5 V alkaline same-size profile.
The numeric 395 code resolves to the SR927SW profile in this catalog. It has no exact LR927 alias here: LR927 is a separate alkaline row even though both codes describe the same listed envelope.
| Marking | Catalog profile | Voltage | Chemistry | Dimensions | Decision |
|---|---|---|---|---|---|
| 395 / SR927SW / D395 | 395 · Silver oxide | 1.55 V | Silver oxide | 9.5 × 2.7 mm | Exact alias / canonical profile Resolves to 395; verify polarity and the device marking.
|
| 399 | 399 · Silver oxide | 1.55 V | Silver oxide | 9.5 × 2.7 mm | Same size · different drain Use the suffix requested by the device or an explicit multi-drain cross-reference.
|
| LR927 | LR927 · Alkaline | 1.5 V | Alkaline manganese dioxide | 9.5 × 2.7 mm | Same fit · different chemistry Use only when the device maker explicitly approves both chemistry systems.
|
Conditional substitutes
399 is the high-drain SR927W counterpart. The comparison engine classifies it as conditional because the size, chemistry and voltage align while the drain marking differs. LR927 changes chemistry and voltage, so it is not an automatic 395 replacement.
Physical fit is not electrical compatibility
A 9.5 × 2.7 mm candidate may seat in the watch, but a watch’s drain demand can make the W/SW distinction matter. Physical fit is the first check, not the final compatibility decision.
How to verify before replacing 395
- Confirm whether the original marking is 395, 399 or LR927.
- Keep the W/SW drain suffix visible when checking a watch-cell cross-reference.
- Use the device maker’s requirement when a same-size alkaline cell is being considered.
Continue with: Compare the nearby LR920 family Review W versus SW Review chemistry differences
Same-size batteries to review carefully
These profiles share the nominal physical envelope. They are not automatically equivalent.
Reviewed comparisons
Technical sources
- International Electrotechnical Commission — IEC 60086-1:2026 — Primary batteries, general requirements
Primary-battery nomenclature, form, fit, function, terminal and electrochemical-system framework.
- Energizer — Battery Replacement Guide
Cross-reference codes and manufacturer guidance to replace the same size and type together.
- Duracell — Battery Cross Reference Chart
Independent manufacturer cross-reference families and corresponding product numbers.
- Duracell — Battery chemistry technical bulletins
Alkaline, lithium-manganese-dioxide, zinc-air and silver-oxide chemistry behavior.